Thermal Imaging Cameras

t: 01924 402424
m: 07595 607 789


We offer what is probably the most efficent, and simplest to use: Thermal Imaging Cameras on the market, and most definetly the best value.

REVEAL FirePRO-X & FLIR K-Series; Thermal imaging cameras for a variety of uses.

In the heat of the battle, a thermal imaging camera is indispensable – a vital tool that helps you quickly visualize your plan of attack, locate hot spots, and save lives. Ideally, every vehicle should have at least one high-performance TIC on hand. And with the introduction of the REVEAL SeekPRO now on the scene it allows for personal issue cameras to be inuse.

The SeekPRO-X has the best resolution and picture clarity possible and is simple to use and operate, with internal picture storage. The Seek PRO-X is designed for emergency services, the SHIELD-Pro has been designed for security and police use,with its extended range options.

Please contact us for full details.

Reveal Seek PRO-X


Key Features
IR resolution 320 × 240 pixels
Water proof design Outdoor IP67 waterproof
Thermal sensitivity <70 mK
Battery life 3.5hours continuous use.
In-camera picture recording  MPEG-4 to internal Flash Memory
Field of view (FOV) / focus 32° / fixed focus
Detection distance 0.3m to 550m.
Image frequency, frame rate 15 Hz  Fast frame
Focus Fixed
Temperature range -20C to 550C.
Flashlight, Built in 300 Lumen LED.
Display screen 2.4inch colour
User interface Self contained, 3 button device.
Temp display scale Fahrenheit or Celsius
Coluir Filters 3 Options: Fire, Survey & Colour.
Focal Plane Array (FPA) / Spectral range Uncooled microbolometer / 7.5–13 µm
Start-up time < 17 sec.
Start-up time from sleep mode < 4 sec.
Image storage 4GB internal drive, 54,000 images.
Packageing Hard transport case, thermal imaging camera, FLIR Tools software (scratchcard), power supply, incl. multi-plugs, battery (2x), battery charger, USB cable, retractable lanyard, strap lanyard, neck strap, tripod adapter, documentation


FLIR K-Series Thermal Imaging Camera Features

Clear and Crisp Thermal Images
The maintenance free uncooled microbolometer sensor produces detail-rich images at 240 x 180 pixels (FLIR K40) or 320 x 240 pixels (FLIR K50 & K55). Thermal images are displayed on a large bright 4” LCD, helping you navigate easier and make more efficient and more accurate decisions.

FSX™ Flexible Scene Enhancement (FLIR K55 only) NEW!
FSX enhances K55 thermal images through real-time digital processing inside the camera. The result is an ultra-sharp image that shows extraordinary structural, edge, and other instantly-recognizable detail. This helps make it much easier for firefighters and rescue teams to find their way through the smokiest, darkest environments, and to instantly identify targets in scenes with extreme temperature dynamics.

In-Camera Video Storage (FLIR K55 only) NEW!
Not only can the new FLIR K55 save hundreds of still images just like the K40 and K50, it can record and store up to 600 minutes of video, in clips of 5 minutes (maximum) each. K55 videos can be useful for later analysis and are ideal for training purposes. Playback videos directly from the in-camera archive or download them to your computer via USB.

Extremely Affordable: A Thermal Imaging Camera in Every Fire Truck
FLIR develops and manufactures more thermal imaging cameras than any other company. Thanks to economies of scale, FLIR is able to offer K-Series at an extremely affordable price.

Rugged & Reliable
The K-series is designed to meet tough operating conditions. It withstands a drop from 2 meters onto a concrete floor, is water resistant (IP67) and fully operating up to +260°C/+500°F for 5 minutes.

Easy-to-Use, Even with Gloves On
An intuitive and simple user interface allows you to focus on the job at hand. The FLIR K-Series can be controlled by 3 large buttons on top of the unit -- ideal for a gloved firefighter’s hand.

Produce Simple Reports
Thermal images can be stored in the FLIR K-Series onboard archive and later be used to produce simple reports of what happened at the scene.

Technical Specifications

Model K40 K50 K55
Imaging and optical data
IR resolution 240 × 180 pixels 320 × 240 pixels
Thermal sensitivity <40 mK <30 mK
Contrast optimization No Digital image enhancement through FSX
In-camera video recording No Non radiometric MPEG-4 to internal Flash Memory
Field of view (FOV) / focus 51° × 38° / fixed focus
Image frequency 60 Hz
Focus Fixed
Zoom 2x, digital zoom
Focal Plane Array (FPA) / Spectral range Uncooled microbolometer / 7.5–13 µm
Start-up time < 17 sec. (IR-image, no GUI)
Start-up time from sleep mode < 4 sec.
Image storage Up to 200 JPEG images on internal Flash Memory
Image presentation
Display 4” LCD, 320 × 240 pixels, backlit
Image modes

IR image,
- TI Basic NFPA Fire fighting Mode
- Black and White Fire fighting Mode
- Fire Mode
- Search And Rescue Mode
- Heat Detection Mode & Thumbnail gallery

Auto-range Yes, mode dependent
Object temperature range –20 °C to +150 °C
0 °C to +650 °C
Accuracy ±4°C or ±4% of reading for ambient temperature 10°C to 35°C
Measurement analysis
Spotmeter 1
Isotherm Yes, According to NFPA and mode dependent
Automatic hot/cold detection Heat detection mode (the hottest 2% of the scene is colorized)
Color palettes Multiple palettes, mode dependent
Regional adjustments Units, date and time formats
Data communication interfaces
Interfaces USB-mini
USB USB Mini-B: Data transfer to and from PC / uncompressed colorized video
Power system
Battery Li Ion, 4 hours operating time
Charging system 2-bay charger, truck charger available
Charging time 2 hours to 85% (3 hours and 25 minutes) capacity, charging status indicatedby LED’s
Charging temperature 0 °C to +45 °C
Power management Automatic shutdown and sleep mode
Environmental data
Designed to meet NFPA 1801 specification: Vibration, impact acceleration resistance, corrosion, viewing surface abrasion, heat resistance, heat and flame, product label durability.
Operating temperature range

–20°C to +85°C (–4°F to +185°F)
+150°C (+302°F): 15 min.
+260°C (+500°F): 5 min.

Storage temperature range –40 °C to +85 °C
Encapsulation IP 67 (IEC 60529)
Bump 25 g (IEC 60068-2-29)
Drop 2.0 m, on concrete floor (IEC 60068-2-31)
Physical data
Camera weight, incl. battery <1,1 kg
Battery weight 0.152 kg (0.3 lb.)
Camera size (L × W × H) <120 × 125 × 280 mm
Tripod mounting UNC ¼”-20
Packaging, contents Hard transport case, thermal imaging camera, FLIR Tools software (scratchcard), power supply, incl. multi-plugs, battery (2x), battery charger, USB cable, retractable lanyard, strap lanyard, neck strap, tripod adapter, documentation

FLIR K-Series Fire Protection Thermal Cameras Image Gallery

TI Basic Mode

Grayscale Mode

Similar to TI Basic but Without Colorization

Fire Mode

Improved Sensitivity in High Scene Temperatures

TI Basic Mode

For Initial Size-up of Fire and Fire Attack

SAR Mode

Optimized Palette to Assist in Locating Subjects

Heat Detection Mode

Hottest Spots are Colorized

FLIR Thermal Imaing Camers